Limey shale overlaid by limestone.

To replace the button, with the cistern full of water and the button depressed, screw the end of the button assembly into the corresponding hole in the flush rod. Tighten.

White (Whitefriars)

Dominican

Cistercian

Carthusian

Camaldolese

Grey (Greyfriars)

Franciscan

Cistercian

Black (Blackfriars)

Benedictine

Franciscan

Dominican

Jesuit

Brown

Franciscan

Capuchin

Carmelite

See also List of screw drives

If you ever need to remember which way to turn a nut, bolt or screw to loosen it, then the mnemonic above will help. Turn it to the left (also known as anti-clockwise).

But one more thing to remember:

you need to have the eye looking at the nut, the bolt head or the screw head, with the thing it’s attached to beyond it. This pretty much is the usual way of looking at the piece of work. One exception is a limescale filter attached to a water tap (common in Spain). To get the eye in the right position for this mnemonic you would have to put your head right into the wash basin, twist your neck and look up at the filter on the tap. It’s easier to just look down on the tap and reverse the rule – clockwise as seen from above loosens it.

All the above only applies to fittings with right-handed screw threads. The vast majority. There are a few exceptions of left-handed screw threads, such as left bicycle pedals and gas pipes as detailed here.

* Prices recorded from March 2019 onwards.

spanishroadsigns.speedtestcustom.com

https://www.newexhibitions.com/map

This is needed every time the batteries are changed.

Under the screen there are four buttons. Top left a clock button; top right a button with M on it (the middle button with a person on it is not needed for this); underneath a button with a circle and a vertical line on it (the on/off button).

Press the clock button to turn the screen on. If it does not turn on, press the on/off button and then press the on/off button again and then try the clock button again.

Once the screen is on, press the clock button for five seconds (not the three that the manual says).

The screen will change to show the year, flashing. Press the M button enough times to change it to the correct year. Keep going if you overshoot. It wraps round at about 2030 or 2040. Then press the clock button.

The screen will change to show the day of the month, flashing. Press the M button enough times to change it to the correct date. Keep going if you overshoot. Then press the clock button. Then repeat all this for the month. These two items may appear in the reverse order.

Keep going and change the hour and minute in the same way. After the final press of the clock button, the date and time will be set and can be used by the memory function of the device.